Bellevue roofing contractors

Confirm the Bellevue permit path before approving construction

Start with the Bellevue municipal resource below and confirm the responsible building office for your exact jobsite address. Describe the proposed roof work before asking which permits, plan review and inspections apply. A covering replacement and work that changes decking, framing, size or slope need a clear scope.

Bellevue city; roof recover: The City says a building permit is not required for a roof recover unless the new roofing adds more than 5% to the total roof weight; the City also says the energy-code requirement does not apply to recover.

Bellevue city; commercial roof replacement: The City says no building permit is required when repaired or replaced commercial roof substrate is no more than two 4-by-8-foot sheets.

Bellevue city; residential roof replacement: The City says no building permit is required when repaired or replaced residential roof substrate is no more than five 4-by-8-foot sheets.

Bellevue city; insulation and building type: The same FAQ describes energy-code insulation provisions that vary by roof assembly and separately identifies multifamily rehabilitation requirements under RCW 64.55. These conditions must not be collapsed into a general reroof rule.

The directly read municipal facts below retain their building and work conditions. Confirm the actual assembly, substrate work and address with the City before relying on a permit screen.

Keep the office’s response with the proposal. Assign any permit application, reviewer response, inspections and completion records to a named person. A cleaning or inspection request may become a different scope if construction is proposed; ask about that new work separately.